VOLTZ RB-22 Hydraulic Rebar Benders 220V 1300W 10-22 MM Hand Hold Portable Rebar Bender, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

VOLTZ RB-22 Hydraulic Rebar Bender Wasting manpower also wastes your time and money. You need a powerful tool —— Light, small, quiet portable and easily to bends rebar, saving power???

Specifications:

1. Type: RB - 22

2. Voltage: 220 V

3. Bending Speed: 2.5-3s

4. No-Load Power: 950W / 1300W

5. Bending Diameter: 10-22mm

6. Bending Angle: 0-130°

7. Weight: 15 kg

8. Packaging details: 625 x 215 x 295 mm

Package Contents: 1 * Hand Held Rebar Bender . Operation Process: 1. Add the hydraulic oil in three times until it is filled 2. Plug-in 3. Lay the steel bar flat 4. Hold down the switch and bend to the desired Angle. APPLICATION: VOLTZ RB-22 Automatic Rebar Bender is widely used in construction engineering for bending rebar, steel bar, steel rod etc.

FEATURES :-

1. Ergonomic Upper Handle :- Specifically designed for job-site operation.

2. Precision Quench Technology :- Anbull electric hydraulic rebar bender comes with a bending block quenched with precision steel casting technology.

3. Multiple Ring Nut Design :- High Strength Cutter Head With Durable Seals.

4. Pressure relief valve :- When reach the angle you want, release the switch. Loosen the pressure release switch, the bending block reset.

5. Hydraulic-powered Piston :- Hydraulic-powered piston features strong thrust with less power consumption and low noise to extend the service life.

6. Forced Air Cooling :- Better heat dissipation and longer service life.

ABOUT THIS ITEM :-

• ?PURE COPPER MOTOR?- This rebar bending machine adopts a pure copper motor for quietly run with low noise and is only on while bending for reducing unnecessary wear. Besides, a copper motor can extend this rebar bender's operating life to a large extent.
• ?SOLID MACHINE BODY?- The rebar bender features a sturdy and durable machine body and steel bent head frame for standing super-hard rebar with strong clamping force and reducing the steel rebar waste.
• ?STABLE PERFORMANCE?- This portable rebar bender offers excellent performance to help save valuable person-hours by bending rebar 0.2'' to 0.9''(4 to 22 mm) within 2.5 to 3 seconds. The bending angle is 0-130 degrees.
• ?PRECISION PRESSURE RELIEF VALVE?- This steel bending machine features a precision pressure relief valve for automatically releasing the pressure. Users open the pressure relief valve to remove the steel after the steel is successfully bent.
• ?COMPACT & PORTABLE?- This portable automatic rebar bender features two handles and an operation switch to start the machine safely and operate efficiently. It is widely used in construction engineering for bending rebar, steel bar, steel rod, etc.