VOLTZ VZ-VHP-5T Split Hydraulic Pullers + CP 180 Hydraulic PumpGear Puller Bearing Wheel Pulling Pumps Oil Tube Drawing Machine

VOLTZ VZ-VHP-5T Hydraulic Split Puller

This portable hydraulic gear puller is made of premium steel with a 5-ton capacity for outstanding performance. You can horizontally or vertically operate the puller with two or three jaws for pulling hubs, flanges, gears, bearings, and many more.

The Split hydraulic puller with hand pump is a new ideal tool to replace the traditional puller. It has the characteristics of compact structure, flexible use, convenient carrying and operation, less labor-saving, and less restricted by the site. It is suitable for various maintenance sites.

• 1. Tighten the oil return valve stem in a clockwise direction before use in hand pump
• 2. Adjust the jaw seat to the jaw hook to grab the object being pulled.
• 3. Tilt the piston starting rod back and forth to move forward steadily, and the jaw hooks back accordingly to pull out the pulled object.
• 4. If the extension distance of the piston starting rod is required to be greater than the effective distance of the hydraulic puller piston starting rod during use, you need to stop when the extension distance is connected to the maximum effective distance, loosen the oil return valve rod, and allow the piston starting rod to retract and adjust After finishing, repeat steps 1-3 again until it is pulled out.
• 5. To loosen the oil return valve stem, just slightly loosen the oil return valve counterclockwise. The piston starting rod gradually retracts under the action of the spring.

SPECIFICATIONS :- Material: 45# Steel - Max Capacity: 5T - Ares Travel: 50mm - Min/Max Reach: 0 - 140mm - Min/Max Spread: 100 - 200mm Package Contents: - 1x Hydraulic Puller - 1 x Hand pump - 1x Handle - 1x 2/3 Leg Puller Yoke - 3x Puller Legs - 6x Nuts and Bolts - 6x Link Plates - 1x Nose Adaptor  - 1x Manual . Carefully read the manual before use. Kindly check the puller hand pump on/off switch before use as it should be fully tight and no air should pass through , for good working of puller.

5T Hydraulic Gear Puller

45# Steel & Adjustable Jaws & (0-140 mm) Reach and (200 mm) Spread

This portable hydraulic gear puller is made of premium steel with a 5-ton capacity for outstanding performance. You can horizontally or vertically operate the puller with two or three jaws for pulling hubs, flanges, gears, bearings, and many more.