VOLTZ RB-16 HYDRAULIC REBAR BENDING MACHINE 900W, Wasting manpower also wastes your time and money. You need a powerful tool —— Light, small, quiet portable and easily to bends rebar, saving power.

Specifications:

1. Type: RB - 16

2. Voltage: 220 V

3. Bending Speed: 5s

4. No-Load Power: 900W

5. Bending Diameter: 4-16mm

6. Bending Angle: 0-130°

7. Weight: 15 kg

8. Length: 600mm

9. Package Contents: 1 * Hand Held Rebar Bender 2 x Carbon Brushes

10. Operation Process: 1. Add the hydraulic oil in three times until it is filled 2. Plug-in 3. Lay the steel bar flat 4. Hold down the switch and bend to the desired Angle.

KEY FEATURES :- 

1. Precision steel casting technology :- Bending rebar up to 4-16mm within seconds. The bending block is quenched with precision steel casting technology, durable enough to satisfy your various bending demand and raise your working efficiency greatly.

2. Multiple screws :- Multiple screws fixed on the head enforce the safety and longevity of the rebar bender.

3. Hydraulic-powered piston :- Hydraulic-powered piston features strong thrust with less power consumption and low noise to extend the service life.

4. Brushless Pure Copper Coil Motor :- Pure copper coil motor powered by hydraulic pump ensure higher reliability of the rebar bender, which means excellent motivation yet low noise.

5. Pressure relief valve :- When reach the angle you want, release the switch. Loosen the pressure release switch, the bending block reset.

6. Detachable Positioning Bolt  :-For starter, marking at the positioning bolt will assist you to bending the angle you want.

ABOUT THIS ITEM :-

• ?Low Noise?The machine is made of copper electric machinery so that it works smoothly and with low noise.
• ?Sturdy & Durable?The rebar/pipe /tube bender features a standing steel bent frame and strong clamping force reducing steel rebar waste.
• ?4-Second Bending Speed?This portable electric rebar bender, with adjustable positioning bolt bends steel super fast in just 4 to 5 seconds.
• ?High-Quality Relief Valve?The precision pressure relief valve help release the pressure after the steel is successfully bent.
• ?Wide Application?This electric hydraulic rebar bender is widely used in construction engineering for bending rebar, steel bar, steel rod, screws, etc.

Instruction:

1. Keeping the switch pressed, the bending block starts to push forward.
2. When reach the angle you want, release the switch .
3. Loosen the pressure release switch, the bending block reset.
4. For starter, marking at the positioning bolt will assist you to bending the angle you want